1. Input meters show the pre-input mixer audio level for each processing module presented as both a meter (peak and peak-hold) and in figures.
2. There are two input routers available. From the input router it is possible to select Analog, AES or Dante inputs.
3. A combined channel status indicator shows faults and warnings on any of the output channels.
4. Module input meters show the post-input mixer audio level for each processing module presented as both a meter (peak and peak-hold) and in figures.
5. Shows the basic ON / OFF configuration of the INPUT MIXER. From the Lake Controller software the signal from input router 1 and 2 can be mixed in ratios from -99 dB to 15 dB through both processing modules.
6. Input source describes which input channel is the module input’s active audio source.
7. Sampling frequency is displayed if a digital input source is selected. With an analog input selected, headroom is displayed.

The Input Meter view displays information about input source, sampling frequency and headroom selected for the two different input routers. The left part of the screen is pre-input mixer and the right part is post-input mixer (the same module input meters are displayed in the rest of the views). Meters display headroom relative to input clip.