Lo Z & 70 V/100 V

Permanent installation applications most often require a mix of Lo- and Hi-Z (constant voltage) speakers.

For example, in a performing arts center or house of worship, the main house system is normally a full-range or actively crossed over multi-way system, while the speakers for peripheral areas may be small line-source boxes and ceiling speakers.

By using C Series amplifiers, you can connect any type of speaker to any output channel by adjusting the Voltage Peak Limiter (VPL™), thus supplying the desired maximum output power or maximum constant voltage supply.

There is no need to buy specific amplifiers for constant voltage and Lo-Z loads, and no need to specify and install external transformers.

The C Series amplifiers’ four- or eight-channel configurations, bridge-mode operation, and the ability to mix Lo-Z and constant voltage outputs with the same amplifier make the C Series extremely flexible and user-friendly. System design and specification is simplified, and installation is more efficient.

For constant voltage lines C 88:4, C 68:4, C 48:4, C 28:4 and C 16:4 are capable of providing up to 4 channels of 100 Vrms or 2 channels of 200 Vrms at various levels of maximum power. C…X models are configured to provide a fixed power output no matter if the impedance is 4 ohms, 8 ohms, 16 ohms or 70 Vrms (100 Vrms is available by bridging two channels).

Read on and learn more by choosing from the topics in the right hand column.