E 8:2

E 8:2

Tech Spec

ModelE 8:2
General
Number of amplifier channels2
Max total output all channels driven800 W
Peak output voltage per channel100 V / 70 Vrms
Max. output current16 Arms
Max output power (all channels driven)
2 ohms400 W
4 ohms400 W
8 ohms400 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 200 W)
16 ohms290 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V400 W
100 VCan deliver 400 W to a 100 V load tapped at 800 W
Performance
THD 20 Hz - 20 kHz at 1 W<0.1%
THD at 1 kHz and 1 dB below clipping<0.05%
Signal to Noise Ratio>112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Frequency Response2 Hz - 40 kHz
Input impedance20 kOhm
Common Mode Rejection (CMR)50 dB
Output impedance25 mOhm
Gain, Sensitivity and Limiters
Limit and gain switch defining limit and gain (per channel)2 pos: Lo-Z and 70 V
VPL for 70 V mode100 V
VPL for Lo-Z mode56.6 V
Sensitivity for stated power into 4 Ohm in Lo-Z mode4 dBu
Sensitivity for 70.7 V out in 70 V mode4 dBu
Sensitivity for stated power into 2 Ohm in Lo-Z mode1 dBu
Sensitivity for stated power into 8 Ohm in 70 V mode2.1 dBu
Sensitivity for stated power into 16 Ohm in 70 V mode3.7 dBu
Gain in 70 V mode35.2 dB
Gain in Lo-Z mode30.3 dB
Level adjustment (per channel)Rear panel potentiometer, from -inf to 0 dB
Connectors and Buttons
Input connectors (per ch.)3 - pin detachable screw terminals, electronically balanced
Output connectors (per ch.)2 - pin detachable screw terminals
High pass filterFixed at 50 Hz, switchable per channel
Power controlCan be used to go between standby and ON
GPI (power control input)Contact closure type, 2-pin detachable screw terminal, controls the power state
GPO (power state output)Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
CoolingSingle fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal voltage100 – 240 VAC
Operating voltage70 – 265 VAC
Standby consumption<1 W
Mains connectorIEC inlet
Dimensions
DimensionsW: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)
Weight
Weight4.2 kg (9.3 lbs)
Finish
FinishDark grey aluminum front and black steel chassis
Approvals
ApprovalsCE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star
Loading...
X