IPD 1200

IPD 1200

Tech Spec

ModelIPD 1200
General
Number of amplifier channels2
Max total output all channels driven1200 W
Peak output voltage per channel50 Vrms
Max. output current16 Arms
Max output power (all channels driven)
2 ohms500 W
4 ohms600 W
8 ohms300 W
16 ohms150 W
Performance
THD 20 Hz - 20 kHz at 1 W<0.1%
THD at 1 kHz and 1 dB below clipping<0.05%
Signal to Noise Ratio>102 dBA
Channel separation (Crosstalk) at 1 kHz >80 dB
Frequency Response2 Hz – 42 kHz
Input impedance18 kOhm
Common Mode Rejection (CMR)50 dB
Output impedance25 mOhm
Gain, Sensitivity and Limiters
SCVPL70 V peak
Sensitivity for full power6 dBu
Gain (all DSP controls set to 0 dB)30.2 dB
Level adjustment (per channel)Software controlled from -inf to 0 dB
Connectors and Buttons
Analog input connectors (per ch.)Neutrik XLR, 3pin female
Analog input link connectors (per ch.)Neutrik XLR, 3pin male
AES input connectors (per ch.)Neutrik XLR, 3pin female
AES input link connectors (per ch.)Neutrik XLR, 3pin male
Output connectors (per ch.)Neutrik speakON / binding post
ButtonsPower, Menu, Back, Mute (per ch.), Power
EncoderAdjust / Set
CoolingSingle fan, front to rear airflow, no filter required, temperature controlled speed
Power
Nominal voltage100 – 240 VAC
Operating voltage60 – 265 V AC
Standby consumption<6.5 W
Mains connectorIEC inlet
Dimensions
Dimensions (Rack rail to rear panel)W: 483 mm (19”), H: 44 mm (1 U), D: 272 mm (10.7”)
Dimensions (Overall incl. handles and rear support)W: 483 mm (19”), H: 44 mm (1 U), D: 344 mm (13.5”)
Finish
FinishBlack anodized aluminum front and black / gray steel chassis
Approvals
ApprovalsCE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15 Class A, EN 55103-1, EN55103-2, ROHS
Loading...
X