LUCIA 120/2M

LUCIA 120/2M

Tech Spec

ModelLUCIA 120/2M
General
Number of amplifier channels2
Max total output all channels driven120 W
Max output voltage per channel 131.0 V peak
Max output current per channel5.5 Arms
Max output power (all channels driven)
2 ohms60 W
4 ohms60 W
8 ohms60 W
16 ohms30 W
Performance
THD 20 Hz - 20 kHz at 1 W into 8 ohms<0.3%
THD at 1 kHz and 1 dB below clipping<0.2%
Signal to Noise Ratio>92 dBA
Channel separation (Crosstalk) at 1 kHz >60 dBA
Frequency Response5 Hz - 22 kHz
Input impedance10 kOhm
Common Mode Rejection (CMR)40 dB
Gain, Sensitivity and Limiters
VPL for 4 ohm mode31 Vpeak
VPL for 4 ohm mode31 Vpeak
VPL for 2 ohm mode22 Vpeak
VPL for 2 ohm mode15 V
Sensitivity, balanced input4 dBu / 1.23 Vrms
Sensitivity, RCA input-2 dBu / 0.62 Vrms
Input headroom for clip, balanced 212 dBu / 3.09 Vrms
Input headroom for clip, RCA 26 dBu / 1.55 Vrms
Connectors and Buttons
Input connectors (per ch.)3 - pin detachable screw terminals, electronically balanced
Input connectors (ch. 1 & 2)Unbalanced RCA type
Output connectors (per ch.)2 - pin detachable screw terminals
GPI (power control input) 32 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.
GPO (power state output) 3Contact closure type, 2 pins in a detachable screw terminal
Default for external monitoring of fault/protection/power off
RS232 4Can be controlled and monitored by third parties via RS232 using both the GPI pins
USBFor firmware update and configuration for the matrix models
CoolingOne fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C
Auto modeThe power state is controled automatically by the audio signal
Level adjustment (per channel)Front panel potentiometer, detented from -inf to 0 dB
Processing Features
Input processing block 5Default with 16 parametric EQs
Mix matrix routing block 54 in - 4 out mix-matrix controllable from GPI
Output processing block 54 EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adaptive ISO 226 compensation)
Two line level outputs 6Each capable of driving 10 LUCIA devices in parallel
Latency from any input to any outputUser adjustable from 9.15 to 137 ms
Power
Nominal voltage100 – 240 VAC
Operating voltage85 – 265 VAC
Mains connectorIEC inlet
Dimensions
DimensionsW: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)
Weight
Weight1.9 kg (4.2 lbs)
Finish
FinishBlack aluminum front and black steel chassis
Approvals
ApprovalsCE, CSA, CCC, PSE, FCC, Energy Star

Notes

  • 1: Into 8 ohms and higher
  • 2: An analog soft limit will be engaged on the input above thislevel to reduce the clip distortion
  • 3: Can be configured for different functionality such as RS232 via USB.
  • 4: Included from October 2016 and onwards.
  • 5: DSP settings determined by settings downloaded from the Application Browser software; not configurable on the unit itself.
  • 6: Noise levels typically allow daisy chaining of 3 LUCIA amplifiers without issues
Loading...
X