LUCIA 60/1-70

LUCIA 60/1-70

Tech Spec

ModelLUCIA 60/1-70
General
Number of amplifier channels1
Max total output all channels driven60 W
Max output voltage100 Vpeak
Max output Current1.8 Arms
Performance
70 V60 W
100 V 130 W
16 ohms60 W
Signal to Noise Ratio>100 dBA
Gain, Sensitivity and Limiters
VPL100 Vpeak
Sensitivity, balanced input4 dBu / 1.23 Vrms
Sensitivity, RCA input-2 dBu / 0.62 Vrms
Input headroom for clip, balanced 212 dBu / 3.09 Vrms
Input headroom for clip, RCA 26 dBu / 1.55 Vrms
Connectors and Buttons
GPO (power state output) 3Contact closure type, 2 pins in a detachable screw terminal
Default for external monitoring of fault/protection/power off
USBFor firmware update and configuration with the Application Browser software
Connectors and Switches
Input connectors (per ch.)3 - pin detachable screw terminals, electronically balanced
Input connectors (ch. 1 & 2)Unbalanced RCA type
Output connector2 - pin detachable screw terminal
GPI 32 channels of voltage sense type. 4 pins in a detachable screw terminal. Default functionality is output level for GPI1 and wake up from stand by for GPI2.
RS232Can be controlled and monitored by third parties via RS232 using both the GPI pins
High pass filterThis filter is in series with the other filters in the DSP and it is controlled with switches on the back. Settings OFF / 50 Hz / 80 Hz.
Level adjustment (per input)Front panel potentiometer, detented from -inf to 0 dB
Processing Features
Input processing block 44 EQ sections per input
Mix matrix routing block 42 in - 1 out mix-matrix controllable from GPI
Output processing block 44 EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adaptive ISO 226 compensation)
Latency from any input to any outputUser adjustable from 9.15 to 137 ms
Power
Nominal voltage100 – 240 VAC
Operating voltage85 – 265 VAC
Standby consumption<1 W
Mains connectorIEC inlet
CoolingOne fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 12 W and the ambient temperature is below 25 C
Auto modeThe power state is controlled automatically by the audio signal
Dimensions
DimensionsW: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)
Weight
Weight1.9 kg (4.2 lbs)
Finish
FinishBlack aluminum front and black steel chassis
Approvals
ApprovalsCE, CSA, CCC, PSE, FCC, Energy Star

Notes

  • 1: The peak voltage is 100 V, but the look-ahead limiter solution ensures that it cannot clip, so in real life use with music or speech it will typically be able to sustain a higher SPL in 100 V applications than 100 V amplifiers with higher peak voltage capability as the amplifier have the capacity to handle peaks way beyond “clip” without sounding harsh.
  • 2: An analog soft limit will be engaged on the input above this level to reduce the clip distortion.
  • 3: Can be configured for different functionality such as RS232 via USB.
  • 4: DSP settings determined by settings downloaded from the Application Browser software; not configurable on the unit itself
Loading...
X